想知道核电机械在合同中说要制造厂要对所有材料进行复验的含意

yincaizu

要知道我们现在做的全是小设备，可以那么说，我们用的材料也就是和复验用的材料一样多，这样我们的生产成本就一下全翻倍，咱也不明白这是设计院的想法。还是在RCC中有要求，请有核二院的朋友告诉一下咱。我们现在有的理解为全部复验，包括外包，外购件，标准件，能不能给说一说，还有人认为是指一些主要件。
战胜自己，未来美好

fsl3602

The equipment are content many part item component etc. When your company Engineer has development the bill of material one column to be indicated the safety category or non-safety category first.   When you buy the safety category material all material test shall be verified by your inspector directly. the non-safety category material can be buy from market the non-safety material supplier shall be provided the CMTR ot C of C to you You don't attended the test--just review the document in your shop before sign the receiving sheet.

This is normal practice that request by USA NRC ASME Code for New nuclear power plant construction project's.

The major problem is you engineer have the experience to identify what item or part belong to safety category or non-safety category.

This is the major technical transfer item --- know the design know the safety category in the equipment and know how to qualified them how to issue the qualification Report. etc !!!!!!

All this to be added in the technical transfer contract . if the answer is "Not in the contract yet".  Then your company shall be done all material test before or after you received the material Because your engineer are indicated all items listed in the BOM are the safety category.--Your company will be loose more more money in the procurement step. that cannot avoid.

I just provide my experience to you for reference.此帖于 2008-05-02 17:26 被 fsl3602 编辑。

135201mj

我个人的理解是所有材料都要复验，包括外包、外购件、标准件。但是封头材料如何复验，是不是制造厂要做一个见证件，请专家指教。