The area monitors of the type "WS 05 C" are stationary room monitoring systems for the dose rate measurement of gamma radiation and X-rays, preferably used for the permanent monitoring of isotope laboratories, radiotherapy rooms, storage rooms for radioactive materials, etc..
The "WS 05 C" is available in the following versions: [size=+2]WS 05 C-1
Area monitor (1 measuring channel) with RS-232-intece for the operation with any probe of the GRAETZ-programme.[size=+2]WS 05 C-2
Area monitor (2 measuring channels) with RS-232-intece for one measuring channel, for the simultaneous operation of max. 2 different or similar probes - any of the GRAETZ-programme.[size=+2]WS 05 C-3 (see picture)
Area monitor (3 measuring channels) with RS-232-intece for one measuring channel, for the simultaneous operation of max. 3 different or similar probes - any of the GRAETZ-programme.
Each measuring channel indicates the measured values on a digital, illuminated LC-display (60x30 mm). For each measuring channel four individual dose rate alarm thresholds are free programmable over the whole measuring range of the connected probes.
When using
gamma probes, the dose rate shown on the LC-display is Sv/h. When an
end window probe for α- and β- measurements or a
NaJ-scintillation probe for β-/γ-measurements is connected, the measured value is displayed in cps. Additionally to the digital display, the dose rate is also indicated in analog form by a logarithmic bar graph.
The instrument is autoranging. When a measuring channel triggers a dose rate alarm, the integrated alarm light of the "WS 05 C" gives an optical as well as an acoustical alarm. In the standard version: orange for "alarm threshold exceeded" and red for "error" (e. g. defective probe). The red LED situated above the display indicates, by which measuring channel the alarm has been triggered.
For connecting the "WS 05 C" with a computer, an RS-232-intece for one measuring channel is available.
[size=+3]Options:
Relay output for an additional external alarm lamp for each measuring channel or a
potential free relay output for each measuring channel instead of the relay output for the external alarm lamps (max. switching voltage/current: 24V, 20 mA). Disconnectible acoustic alarm (only triggered when an alarm threshold is exceeded and the monitored room's door is open)
Emergency power supply (300W) for the uninterruptible operation of the "WS 05 C" in case of mains failure.
Integrated alarm lamp (optical/acoustical) for the indication of the following conditions:
green: "ready for operation"
orange: "alarm threshold exceeded"
red: "error" External alarm lamps (optical/acoustical)
Probe cable (standard length: 1,25 m), extension up to 100 m
Special versions upon request
[size=+3]Technical Data "WS 05 C"
Types:WS 05 C-1 for the connection of one probe (1 channel)
WS 05 C-2 for the simultaneous connection of max. 2 probes (2 channels)
WS 05 C-3 for the simultaneous connection of max. 3 probes (3 channels)
Probes:The probes are preferably connected by means of a probe cable (up to 100 m) or
directly via the sockets of the of the "WS 05 C".Measuring size:H*(10) ambient dose rate equivalent for CE-probesAvailable probes:
18545 CE:
18550 CE:
18529 CE:
18509 CE:
18526 D:
NaJ-Scintillation Probe 2002:
Indicating range PTB-approved measuring range
60 nSv/h - 200 μSv/h 150 nSv/h - 200 μSv/h (γ-radiation and X-rays)
100 nSv/h - 20 mSv/h 10 μSv/h - 20 mSv/h (γ-radiation and X-rays)
10 μSv/h - 10 Sv/h 0,5 mSv/h - 10 Sv/h (γ-radiation and X-rays)
10 μSv/h - 1 Sv/h 50 μSv/h - 1 Sv/h (γ-radiation and X-rays)
cps, α-, β-, γ-radiation
cps, β-, γ-radiation
PLEASE NOTE:
The PTB-approval of the probes is only valid when used together with the dose rate meter "X5C
plus" Measuring accuracy:≤ +/- 10%Display:each measuring channel is equipped with an illuminated LC-displayIndication:- digital indication in Sv/h or cps, depending on the connected probe
- analog indication by a logarithmic bar graph Alarm:- probe failure alarm
- dose rate alarm thresholds 1 - 4
- dose alarm thresholds 1 - 4Alarm signals:- integrated optical/acoustical signal, triggered when a connected probe signalizes a dose rate alarm (orange) and/or error message (red)
- red LED for alarm indication when an alarm threshold is triggered (at each measuring channel)Intece:RS-232 for 1 measuring channel (WS 05 C-2 / WS 05 C-3 → first measuring channel)Dose rate alarm thresholds:for each measuring channel 4 dose rate alarm thresholds are free programmable over the whole measuring range of the connected probesDose alarm thresholds:for each measuring channel 4 dose alarm thresholds are free programmable over the whole measuring range of the connected probesTemperature range: 0 °C up to +40 °C for the area monitor
-30 °C up to +60 °C for the probesHumidity:max. 90% relative humidityPower supply:90-260V AC 200 mA max. 50/60 HzHousing:plastic, high impactDimensions:260 mm x 230 (455) mm x 150 mmWeight:approx. 2,8 kgs
孙先生 13488757953
北京铭诚泰达科技
发表于 2011-8-17 06:57:50